The summer sun has inspired the Myers’ Home team to get that roof on quickly! They’ll be rising with the sun and reporting to Newbern at 6 o’clock sharp to beat the heat until that roof is high and dry.
Before corrugated metal can wrap this house, it has to be layered with sheathing, waterproofing, and a vapor barrier. Myers’ Home Team is using ZIP System structural sheathing for this endeavor, which combines OSB exterior sheathing and weather protection into one tidily engineered sheet.
On the Up and Up
The team is squaring and stabilizing the framing as they install sheathing. It acts as shear bracing for the trusses and keeps the house in line. At 4′ x 8′ feet, the ZIP System sheets are near identical dimensions as typical OSB sheathing. And they’re applied just the same too!
The install process goes as follows; Madeline holds the sheet from the top, Riley ensures it’s flush to its neighboring sheet, and Judith checks that it’s level. Riley tacks the board at the bottom and Madeline moves outside so it can be secured on all edges.
Next, the crew installs the sheets over window and door openings and cuts out openings with a reciprocating saw. Quite of few of the scraps from this process can be used on the second row of wall sheathing, as well as angled gable ends. These guys also site measure to check that they are aligning with studs and have adequate support.
This keeps on going all the way up to the beginning of the roof pitch. Let the scaffolding saga begin!
Theories of Roof
Hey, remember back when Myers’ team was discussing that attic and those trusses? They picked a 10/12 roof pitch. This incline certainly makes for a trickier time getting those big ZIP sheets up and secured. In addition, due to high prices of lumber right now, purlins proved to be budget-prohibitive and didn’t play well with the existing roof flashing detail. All things considered, these folks had to make a special plan for the ascent.
What do all the members of this group have in common? Rock climbing–and they’ve got the gear to prove it. They’ve all gone through safety training and designed a system of secure anchors at the roof peak. It sure doesn’t hurt having a retired rock climbing wall manager hanging around either, top-notch rigging Riley! This rope setup allows for relatively quick and easy movement up, around, across, and down that big, wide roof. Want to see it in action?
Stick Around, Why Don’t You?
After the sheathing is installed, the seams between panels must be sealed to complete the weatherproofing. The team uses ZIP System tape and special rollers to apply this across the whole field of sheets.
The previously introduced “shell method” for Myers’ Home relies on this sealed up ZIP System box that provides a dry and durable layer for the house.
Riley, Mad, and Jude are dodging pesky summer showers to square away this task. Next up? Look out for roof metal, quite a few cross-state order pickups, and soon-to-be-introduced pre-fab window units! Until next time…