Live from HomeLab, it’s Wood Chimney Experiment preparation. The Thermal Mass and Buoyancy Ventilation Research Project team members are continuing their efforts to refine a passive cooling and ventilation system which can be deployed to public buildings in the rural South. Due to the fantastic results from the Concrete Chimney Experiment, the team is starting the Wood Chimney Experiment. They have developed an experimental method for designing and building chimneys which test the Optimal Tuning Strategy. They also have honed their data collection workflow and analysis. Now they can move on to testing how timber can work as a thermal mass. You can read about why we are using mass timber as a thermal mass here.
The first step in Wood Chimney Experiment preparation is gathering materials. The team collected sensors that the Mass Timber Breathing Wall team is no longer using. Rural Studio has been growing its scientific equipment stock which allows for reuse between research projects. The TMBVRP team is inheriting data loggers, heat flux sensors, thermocouples, power supply, and airflow sensors. They will be using different temperature sensors, thermocouples and heat flux sensors, then are used in the Concrete Chimney Experiment. These sensors, like the GreenTeg Go Measurement System, will still deliver the proper temperature readings. This equipment is flexible and adaptable making it easily reusable between projects.

Next, you might remember the team’s good friend, GeoFoam. GeoFoam is a type of dense expanded polystyrene foam usually used for earthwork under roadways. Both research teams have been able to use it as insulation for their experiments after the geofoam was donated to the Studio from a construction site. Remember, the team must cut smaller sections of GeoFoam from a huge 8’ x 4’ x 4’ block using a hot wire. The team was able to do so underneath the Morrisette Campus Fabrication Pavilion for a designated time and with faculty approval to ensure safety during the pandemic. They collected the rest of the batt insulation from storage in Brick Barn as well as materials for the structure of the experiment. Everything was hauled back to HomeLab for construction.
Next, the Thermal Mass and Buoyancy Ventilation team continued cutting down and shaping openings in the Geofoam. The top and bottom pieces of the chimney are made of two 6” thick pieces of GeoFoam that are adhered together as 1’ of insulation is needed for the proper U-Value for testing. The top and bottom pieces have cones carved out to ensure proper airflow. Resident King of Precision, Jeff Jeong, double and triple checks each piece of foam. This way the Chimney comes together like an airtight puzzle.
The base for the chimney is constructed out of 2” x 4” lumber and plywood. The legs of this base are taller than the Concrete Chimney Experiment to match its height after being raised. Another difference in the design of the experiments is the walls of the interior chimney which the wood panels will be attached to. The walls for the Concrete Chimney Experiment are, from the chimney chamber outward, concrete panels, insulation, plywood, and then more insulation. The walls of the Wood Chimney Experiment will be pine panels, insulation, ZIP sheathing, and then more insulation. Notice Dijon doing his best to help in the photos below.
Last, but not least, is pre-drilling holes for the concrete panels. The concrete panels will be screwed to the insulation, ZIP sheathing wall. There will be four walls to complete the chimney. Notice the grain direction of the panels. This edge grain allows for parallel heat transfer between the air within the chimney chamber and the pine panels. Not only is the Thermal Mass and Buoyancy Ventilation Research Project testing if timber works as a thermal mass but how the grain direction affects its efficiency as a thermal mass.
The Thermal Mass and Buoyancy Ventilation Team is excited for the Wood Chimney Experiment to come together. So are the kittens! The team would not leave you without a HomeLab mascot update. While Dijon mostly naps, Rosemary is trying to get some construction experience to build her resume. They’ve had to tell her she is not OSHA certified, but she is fine napping a safe distance from construction now. It was not a hard sell. Stay Tuned to see the completed Wood Chimney Experiment!