My my, dear reader, it has been some time hasn’t it? Welcome to my latest journal recounting the design and progress of Reverend Walker’s Home. I can assure you the silence has not been due to any lack of activity, rather the opposite. Upon completion of the large pavilion structure, my crew has moved underneath to begin constructing the enclosed volumes that inhabit the space between slab and roof. You can be sure that they are grateful for the sheltered workspace that defends them from rain and sun. They have no excuse to not be working. Myself, I have found it a most suitable location for napping. There’s much to catch you up on, dear reader, so let’s begin with a recap of the design of the Reverend’s Home.
Reverend Walker’s Home is a response to the rural phenomena of home addition, which you can read about in an earlier journal. It aims to provide a forgiving space on a strong foundation to facilitate successful addition. The home is a kit of three parts: a slab, a roof, and two enclosed volumes. One volume is the main living block with all necessary program. The smaller volume is a partially unfinished space furnished with utility stub-outs.
The intentionally disparate items are intended to imply a process of addition… first the slab, second the roof, third the enclosure, and so on and so forth. Although the home encourages clients to design and extend the enclosure according to their lifestyle, it is completely livable as-built. Crew member Paul likens the Reverend’s Home to a “hook to hang one’s hat on”. Ultimately, it is built as a minimal enclosure with a luxury of porch space. The porch could exist as outdoor living, or be infilled.
As of now, the roof and slab are done. The only piece of the kit left is the enclosure.
As a part of our vapor barrier system, we used a DOT approved slab seal to ensure that moisture can neither seep into the slab or move up through it into the home. Before sealing, the slab was pressure washed and left to dry for 48 hours. This stuff is very hydrophobic and water now squeegees right off.
Before diving into framing the units underneath the roof, we needed to ensure that our details were going to work. We do this by building 1:1 mockups. In ours, we tested framing and flashing details, as well as a full-scale mockup of our custom window design. You might recall that our team has designed a window system made of a fixed glass pane and an operable ventilation hatch. By doing the mock-up we were able to refine details and systems which will make a better final product.
Satisfied with our details, we’ve moved on. To make things easier in the future, we decided to go ahead and attach our treated sill-plates to the slab and build the sub-floor. We used powder-actuated and pneumatic tools for the plates. The sub-floor is r-7.5 rigid insulation between sleepers with plywood on top. Following the installation of the floor, we were ready to frame.
There you have it, dear reader, the current state of Reverend Walker’s Home. It’s certainly beginning to take shape. With my thoughtful leadership, I have brought us to this point and will continue to ask my crew to go above and beyond. I am confident they will not disappoint me. My next order will be for them to put up sheathing and wrap the house, after which I will banish them to the woodshop to build all the windows and doors. Alas, I could go on forever, dear reader, if only it wasn’t my nap hour. For now, I must retire to the captain’s table and rest my weary paws.