Oh hi, didn’t see you there behind my giant block of Geofoam insulation! Let me explain. Recently, Thermal Mass and Buoyancy Ventilation Research Project Team has been designing their first experiment, the desktop scale experiment known as “the chimney,” and building a mock-up of it.
The team used the data obtained from the thermal conductivity testing in Auburn University’s material testing lab along with their test concrete panel making experience to choose which concrete mix to use. They are going with Quikcrete Pro-Finish 5000, a high strength, smooth finish mix. Next, the team poured nine new concrete panels at the adjusted thickness. The thickness of the panels increased slightly due to inputting the exact thermal properties of the concrete mix into the code of the optimal tuning application.
The desktop experiment takes the form of a 3″ x 1″ x 1″ chimney with the thermal mass panels facing the interior. The desktop experiment needs to operate in nearly ideal conditions which means eliminating as many variables as possible. It is important to remember this is a scientific experiment of an unproven theory of how an internal thermal mass can be sized for a space to control temperature and promote proper ventilation. Therefore, to eliminate the variable of heat loss or gain from the exterior to the interior, and to understand how the thermal mass panels themselves are working, the chimney needs to be highly insulated.
section of the desktop experiment
When you need R50 insulation, even for such a small structure, it can get expensive and big. Their creative solution to getting the proper insulative value without spending hundreds of dollars per test was combining Geofoam and Rockwool! EPS Geofoam is much like rigid insulation but is typically used for earthwork such as building up underneath highway on-ramps. It is very dense giving it more insulative value per inch. Rockwool is a rock-based mineral fiber insulation. Thankfully, Rural Studio had extra R30 from a previous donation. The Geofoam was also donated, the Breathing Wall Mass Timber team got in touch with a construction operation that had extra and transported it to Newbern. In the drawing above you can see the concrete panels screwed onto a piece of 1/2″ OSB and 2″ Geofoam which is then surrounded by 9″ of Rockwool then encased by another layer of 2″ Geofoam. This combination of materials results in R50 insulative value.
The Geofoam comes in giant 8″ x 4″ x 3″ blocks because they are typically stacked underground. So another creative solution was needed, how to cut it down to the size we need. The TMBV team did not have to think too hard on that one because their big sister research team, the Breathing Wall Mass Timber squad, had already built a hot wire cutting system for their own Geofoam needs. A copper wire was spanned at the desired height above a table and heated using cables and an external power source.
Next, the Geofoam block was slid across the table and cut through by the hot wire. Once the Geofoam is at a more manageable size it can be cut using a hack saw. Shout out to the best big sister research team ever, Fergie, Jake, Preston, and Anna, the TMBV team appreciates you!
Whew, that was a lot of insulation talk! To ease everyone’s mind here is a beautiful Newbern sunset. See you next week!