Hi everyone and welcome back to the newest edition of the Rural Studio Bathhouse blog! We hope that everyone had a happy holiday season and is having a great new year so far. It has been a very busy month for the Bathhouse team. We are excited to share what we are up to.
In studio over the past month, we have had some really extraordinary reviewers. We are especially grateful to Andrew Berman from New York City and our good friend Marlon Blackwell from Arkansas. They have both helped tremendously with the treatment of spaces and materiality on the interior of the Bathhouse!
On site, we are very excited to be pushing quickly toward the pouring of our raised concrete floor slabs. The team is working hard to get all the plumbing in place to be ready to pour. We are also beginning the process of building the formwork for the edges of the slabs.
We started the process by working through the underground pipes. Then, we marked out all the pipes on the ground, indicating where they would run under the breathing wall pods. We also marked where they would intersect with our CMU walls. The team went to town digging once everything was marked out. With the help of a few new, brave 5th-year friends, the digging under the breathing wall pods didn’t take long at all!
With the help of Steve and his tools, we were also able to drill all the holes for the pipes to run through the CMU walls.
Once the trenches were in place, we began to dry fit all the underground pipes and level them with sand to the necessary slopes.
After dry fitting everything, we worked piece by piece to glue it all together. As of this blog post’s writing, everything has all been glued together! The team will test all the underground lines to make sure there are no leaks in the coming days.
We also picked up the metal beams and decking that will support the slabs and have been preparing them for installation.
We sanded and painted the beams. With Steve’s help and working with his tools again, we were also able to cut the beams to size. And he was able to make the notches in the CMU walls where the beams will sit.
Once the beams and decking are in place, we will install the rest of the plumbing in each crawlspace. The formwork will also begin to go up around the edges of each structure, helping support the cantilevering edges of the slabs. The team is currently working on the design of the formwork and has built a mock-up of one possible support.
Although the main focus has been getting ready for the slab pours, the team has not lost sight of the next major step in the project: the stacked wooden walls! We have also built a table, which we lovingly call the “jig table,” in order to be ready to go with the walls as soon as the concrete is done. It will help us the rest of the project with assembling the stacked modules for the wood walls.
The table will provide a surface to align all the pieces of wood together, allow us to be clamp and fasten them together, and offer stability when we drill the holes for the threaded rods to run through.
Thanks for following along and reading this update. We hope that when we speak again, we will officially be done with the slabs and working toward the construction of our wood walls!
– Rural Studio Bathhouse Team
Carla, Ambar, Ashley, and Logan