cabinetclass

That’s a Wrap

Our spring 2021 3rd-year students finished off their time at Rural Studio with a bang! The last couple of months in Hale flew on by, taking nine students away with them.

History Class

As the semester wrapped up, so did the seminar with their professor, Dick Hudgens. Students toured a few more pre-civil-war homes and Dick held final reviews for the students’ work. Out on the Spencer House front porch, each member of the class presented three months’ worth of sketches from house tours, watercolor work, and historic housing “Design Problems.” Thanks to Ian Crawford for attending the review and providing his wise-as-ever advice and expertise!

Shop Class

Students worked diligently until the very last hour, oiling and installing cabinets. Plywood cabinets finished with tung oil and paste wax were designed and built this semester for the following spaces in Ophelia’s new home: the kitchen, nook, utility room, bathroom, and bedroom. That’s a lot of cabinets! Nineteen, to be exact.

Cabinets are nearly ready for use!

Yes, they also built a house!

During the past few months, a lot happened at Ophelia’s Home. The remaining pieces of ZIP System sheathing were nailed into place by the Enclosures Team; Ashley, Juyeon, and Logan. Then windows, doors, and joints were meticulously taped.

After Ophelia chose a siding color—burgundy—the team got to work installing the corrugated metal cladding. By the end of the semester, these three students of the Enclosures Team were mastered cutting and installing metal panels.

a group of people gather to watch a woman present some color options
Pick a color, any color.

Remember those funky exterior design charrettes? The ones considering tricks-of-the-eye and optical illusions? Well, those design discussions came to fruition during siding installation. The metal corrugation runs in two directions, which helps enhance a new proportion on the front faces while disrupting the front corner of the house.

a view of a burgundy house in a big yard with a green-colored house in the background
Where does the porch wall terminate? You may never know.

The MEP (Mechanical, Electrical, and Plumbing) Team—James, Kirby, and Wendy—spent their days putting together the many parts and pieces that give a house running water and power. These three students installed the entire MEP system for Ophelia’s Home from scratch! Because there’s so much that goes into these systems, they spent a whole lot of time driving to Lowe’s and back… and to Lowe’s and back again.

two students load a cart with pvc pipe in a hardware store
Gotta have plenty of pipe

While MEP and Enclosures Teams were working away, the Interiors/Rough Framing Team–Austin, Drew Haley, and Sadie–was steadily constructing the back stoop and front entrance to the house. They also put the finishing touches on the inside of the house. First, they tackled the back stoop: digging holes for three posts, constructing a platform, decking the platform, and building the stairs.

a set of wooden stairs lead to the door of a partially-clad house
Dang, that’s a nice lookin’ stoop.

The team then moved inside and recruited help from members of the MEP Team to paint the walls and ceiling and install laminate flooring.

a woman kneels over flooring boards while she hammers the pieces together
Tap, tap, tap

For Ophelia’s front entrance, this team built the formwork for and poured the concrete ramp! Many thanks are due to Andrew and Steve for helping with the ramp’s design and construction.

Ophelia’s Home: All Ramped Up

Pig Roast

The semester concluded with an “in-house” celebration of the Studio and the incredible body of work accomplished this year. We’ll miss these students dearly, and hope they return to Hale again soon (5th-year, perhaps?). Once a part of Rural Studio, always a part of Rural Studio.

Bye for now!

A Bittersweet End to the Inaugural Cabinet Class

plan perspective of Ophelia's Home focusing on millwork
plan perspective of the millwork in 20K Ophelia’s Home

The spring semester has come to the end, and what a wild four months it has been! At first, the Cabinet Class endeavored on a new adventure into the land of CNC routing by setting out to design and fabricate the millwork for 20K Ophelia’s Home.  Typically, the 20K Home is outfitted with off-the-shelf cabinetry units for kitchen and bathroom storage from the big box stores, i.e. Lowe’s or IKEA. The quality of the cabinets purchases is usually reflected in what the Studio can afford. To improve durability of these particle board cabinets, we decided to create cabinet designs that would be both more affordable and sturdy. 

Despite all of the obstacles created by the COVID-19 pandemic, this has been an exciting semester filled with discovery and empowerment for the Studio as well as the students.  The first half of the semester focued on learning about the CNC router and its accompanied technology. By March, initial design for all of Ophelia’s Home storage was nearly complete, and the students built a physical mockup of their cabinets.

Remote learning, however, began at the end of Spring Break. Yet, the students continued to move toward a final design of storage spaces, which included the kitchen, bathroom, utility room, and bedroom closet storage.  This week, the teams presented a presentation of their final project: a book that explains the context of their cabinetry designs and a stylized guide of instructions on how to build the cabinets.  The class hopes this this books will be used to continue the exploration of millwork when studies resume in Newbern.  Hopefully, the adventure will continue very soon!

Thanks to all those who helped make this class a success, including Dylan & Keith from Wood Studio and John Byler from Dudley Hall’s shop in Auburn.  This semester’s great work would not have been possible without your help!  Most of all, thank you to the Rural Studio 3rd-year students who persevered through tough circumstances.  Great job to all!  

Building a Book in Shop Class

rendering of kitchen cabinets' design
student’s rendering of Ophelia’s kitchen cabinetry design

We’re now in the home stretch! Students are vigorously working toward a quickly-approaching end of the semester. We have just about one week left. Everyone is pitching in to fine tune their drawings and produce a book that will explain the process of building cabinets for a Rural-Studio-built home.

The class has drastically changed over the last month: a woodshop class is now unable to actually work in the Studio’s shop. So, the class determined that next best thing to real fabrication is to build a virtual instruction guide that will help the future Rural Studio cabinet builders.

All the great work that was done prior to the COVID-19 Pandemic is now enabling everyone to work from their homes, whether they be in Alabama or even South Korea. Zoom video calls are amazing things! Students are working to create a book that includes in-depth drawings and instructions on how to build a set of cabinets. Stay safe and stay tuned for a more in-depth look into the final book!

Cabinet Class From Afar

A lot has happened since the last Cabinet Class blog! Rural Studio has transitioned their classrooms to remote learning for the remainder of the semester, in response to concerns about the spread of the coronavirus (COVID-19). Anyone see that coming? Not us.

To keep everyone safe, class is now being held on an online video platform. Obviously, this will change what is expected from students for the rest of the semester. Unfortunately, in accordance with Auburn University regulations, the Studio has put all on-site construction on hold, which includes 20K Ophelia’s Home. As a result of all of these changes, this class will regretfully be unable to fabricate their cabinets this semester. 

This change in plans, however, will not stop the class from powering forward! Teams are now working remotely to finalize the design of their cabinets. With their final designs, students will create thorough sets of construction drawings and instructions for the use of Ophelia and Rural Studio.  Hopefully, at the end of April, this class will have all components needed to build the cabinets, so the next class can construct cabinets when the Studio is able to return to the shop. Steve and Chelsea are excited to see the beautiful fabrication drawings this semester creates!

Zoom Meeting with Joo, Jay, and Hannah

Midterm Reviews

Spring Break is here, and this 3rd-year class is almost ready to build!  Before Spring Break, however, the students were reviewed by some incredible experts for their midterm.

For the class’s first review, friends from Wood Studio, Dylan and Keith, and Emilie Taylor from Tulane came and gave their sage advice on the students’ design and built cabinet mockups . 

For their second and final miderm review, the Studio’s fearless leaders Andrew Freear and Emily McGlohn visited the class.  Given this is the first time Rural Studio’s woodshop class has ever ventured into building cabinets, Steve and Chelsea wanted to provide the students with as many perspectives as possible.  Thanks to all of the wonderful reviewers the Cabinet Class has had over the last couple of weeks!