Exciting times at the Horseshoe Courtyard, after cleaning nearly 4,000 bricks, the brick pad is finally coming to life! The team and their helpers began laying bricks to create an intricate, hard surface in the main courtyard space.
First, the team made a wooden frame of 2″x 6″ lumber staked into the ground which created a perimeter. This perimeter frame acted as a tray for the sand, which built up underneath the bricks. The sand is tamped and leveled, creating an even surface on which to lay the bricks. Also, the frame acts as a guide, keeping the entire pad square.
A Puzzling Pattern
After filling small sections of the frame with leveled, tamped sand the bricklaying begins. The team chose a basket weave pattern for the brick pad. However, it was not until all the bricks were cleaned and sorted that the team understood the variety of shades and sizes of the material. How these different bricks filled the pattern added another layer of complexity. The basketweave pattern is made-up of “squares” which contain eight specific bricks of different colors, sizes, and textures.
So, within the designed pattern, the most important rules were aligning the outer edges of the “squares”, keeping gaps between bricks small, and leveling the bricks to the height of the neighboring concrete. Seen above is the final pattern which contains red, brown, burgundy, orange, and grooved bricks. Some are large, some are small, but together they create a dynamic pattern.
As the brick pad kept growing, Dr.Dorsey would stop by and test out the future dance floor. However, when he didn’t dance away quick enough, the Horseshoe Courtyard team put him to work spreading out sand between the finished bricks!
Once the brick pad is complete, metal edging will keep the bricks in place. As mentioned earlier, the brick pad surface will be level to the concrete for seamless access to the main courtyard space. The brick pad is crucial to the flexibility of the courtyard design, giving a hard surface for outdoor activies such as Dr. Dorsey’s dancing.
Time for a throwback! Recently, the team picked up the last of their fabricated metal pieces. This included the railing, grinder pump cover, and bench legs. They took all these pieces to be galvanized, after some on-site welding on the grinder pump cover. Keep checking in to see the Horseshoe Courtyard Project continue to transform.